Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "SmartRG SR506n Firmware"

From Support
Jump to: navigation, search
(Created page with "=Firmware= <div class="ncfrightbox w-25"> {{Template:SmartRG SR506n}} </div> '''We recommend that you only do firmware update over an ethernet connection and NOT via wifi. Als...")
 
m
Line 1: Line 1:
=Firmware=
 
 
<div class="ncfrightbox w-25"> {{Template:SmartRG SR506n}} </div>
 
<div class="ncfrightbox w-25"> {{Template:SmartRG SR506n}} </div>
 
'''We recommend that you only do firmware update over an ethernet connection and NOT via wifi. Also DO NOT power off the modem in the middle of a firmware update'''
 
'''We recommend that you only do firmware update over an ethernet connection and NOT via wifi. Also DO NOT power off the modem in the middle of a firmware update'''

Revision as of 08:57, 29 August 2018

We recommend that you only do firmware update over an ethernet connection and NOT via wifi. Also DO NOT power off the modem in the middle of a firmware update

The current firmware available to the NCF Office is 2.6.1.6. You can verify your firmware by checking the software version on the Device Info page.

SmartRG SR506n Firmware version check on Device Info Page
SmartRG SR506n Firmware version check on Device Info Page

To request a copy of this firmware email [support@ncf.ca]. To install this new firmware onto your modem perform the following steps:

  1. Download the firmware file and save it to a location on your computer that you can find easily.
  2. Open a web browser and go to the address http://192.168.1.1
  3. Select Manage Gateway (Advanced) and log in (by default the username is admin and password is your dsl password as shown in Getting Started above)
  4. Click on ManagementUpdate Software
  5. Click on Browse
  6. Upload the firmware file that you downloaded in step 1.
  7. Click Update Software
SR506n firmware update
SR506n firmware update

Note: the modem will reboot once the new firmware has been uploaded. This process may take up to 15 minutes to resync (DSL light returns to solid green) and reconnect (the internet light starts blinking again).