National Capital FreeNet / Libertel de la capitale nationale

Modem manuals (DSL)

The manual for your NCF-supplied DSL modem can be found at the links below.

For instructions on how to configure these modems, see Modem Configuration (DSL)


TP-Link Modems

9970, four-port ethernet + "N" wireless ADSL/VDSL

8816, single ethernet port ADSL

8951ND, four-port ethernet + "N" wireless ADSL

8950ND, four-port ethernet + "N" wireless ADSL

8901G, four-port ethernet + "G" wireless ADSL

8616, one-port modem only

Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.

Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.

SmartRG Modem

SR505N, four-port ethernet + "N" wireless VDSL

Sagemcom Modem

2864, four-port ethernet + "N" wireless VDSL

Thomson Gateways

NCF sold Thomson modems prior to December 2011. Before 2010, Thomson Gateway (TG) DSL modems ('gateways') were called 'SpeedTouch' (ST).

TG585 DSL modem version 8, four-port ethernet + wireless ADSL

TG585 DSL modem version 7, four-port ethernet + wireless ADSL

ST585 DSL modem version 6, four-port ethernet + wireless ADSL

ST516 modem version 6, single ethernet port ADSL

See also