Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Modem manuals (DSL)"

From Support
Jump to: navigation, search
(8616, one-port modem only)
(8616, one-port modem only)
Line 67: Line 67:
 
Very rarely encountered.
 
Very rarely encountered.
 
Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign  one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.
 
Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign  one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.
 +
 +
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
 
* [http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide.pdf Modem_Manual]
 
* [http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide.pdf Modem_Manual]
  

Revision as of 13:58, 14 September 2015

The manual for your NCF-supplied DSL modem can be found at the links below.

For instructions on how to configure these modems, see Modem Configuration (DSL)

SmartRG Modem

SR505N, four-port ethernet + "N" wireless

Sr505N-front.jpg


Sagemcom Modem

2864, four-port ethernet + "N" wireless

Sagemcom 2864 external view.JPG


TP-Link Modems

8951ND, four-port ethernet + "N" wireless

TP-Link TD-W8951ND.jpg


8816, single ethernet port

TD-8816-02.jpg


8950ND, four-port ethernet + "N" wireless

TP-Link TD-W8950ND.jpg


8901G, four-port ethernet + "G" wireless

TD-W8901G-02.jpg



8616, one-port modem only

TD-8616.jpg

Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.

Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.

Thomson Gateways

NCF sold Thomson modems prior to December 2011. Before 2010, Thomson Gateway (TG) DSL modems ('gateways') were called 'SpeedTouch' (ST).

TG585 DSL modem version 8, four-port ethernet + wireless

TG585v7 45 LR.jpg


TG585 DSL modem version 7, four-port ethernet + wireless

TG585v7 45 LR.jpg


ST585 DSL modem version 6, four-port ethernet + wireless

ST585v6 45.jpg


ST516 modem version 6, single ethernet port

ST516v6 45.jpg


See also