Head blueLogoText.gif NCF HelpWiki
Help | StartPage

VOIP

From Support
Revision as of 13:47, 2 November 2012 by Fn352 (talk | contribs) (initial entry)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

VOIP means Voice Over Internet Protocol, where your telephone service is provided via the internet.

Using VOIP with a TP-Link modem

If you are using VOIP with a TP-Link modem you may experience problems such as voice is received but not transmitted after a connection is established. This may be addressed with a command line setting change in the modem to enable this via telnet.

ip nat service sip sw off

If the command is successful the following line will be returned:

nat sip v2 switch off

Accessing Telnet

Linux

On Linux operating systems you can access telnet by opening a terminal and typing in "telnet" at the prompt.

Windows

On Windows XP and Vista operating systems telnet can be accesses by using the run command and entering telnet.

Windows 7 and 8 does not support telnet out of the box, but is can be run by installing and using the PuTTY free software application.