Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Template:TP-Link 8616"

From Support
Jump to: navigation, search
m
m
Line 5: Line 5:
 
   [[File:TD-8616.jpg|border|x120px|TP-Link 8616 Front]] [[File:8616back.jpg|border|x120px|TP-Link 8616 Back]]
 
   [[File:TD-8616.jpg|border|x120px|TP-Link 8616 Front]] [[File:8616back.jpg|border|x120px|TP-Link 8616 Back]]
 
   </div>
 
   </div>
Very rarely encountered.
+
Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts.
Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign  one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.
+
Use modem manual for configuration (Especially Section 3.1)
  
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
+
Configuring on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem.
 +
The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
 
* [https://www.tp-link.com/ca/products/details/cat-15_TD-8616.html home page]
 
* [https://www.tp-link.com/ca/products/details/cat-15_TD-8616.html home page]
 
* [https://static.tp-link.com/resources/document/TD-8616_V8_User_Guide_1910010865.pdf Modem Manual]
 
* [https://static.tp-link.com/resources/document/TD-8616_V8_User_Guide_1910010865.pdf Modem Manual]

Revision as of 17:07, 6 February 2019

TP-Link 8616
 TP-Link 8616 Front TP-Link 8616 Back

Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. Use modem manual for configuration (Especially Section 3.1)

Configuring on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.