Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Template:TP-Link 8616"

From Support
Jump to: navigation, search
m
Line 9: Line 9:
  
 
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
 
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
* [http://www.tp-link.com/lb/products/details/TD-8616.html 8616 home page]
+
* [https://www.tp-link.com/ca/products/details/cat-15_TD-8616.html home page]
* [https://web.archive.org/web/20130626111650/http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide.pdff Modem Manual]
+
* [https://static.tp-link.com/resources/document/TD-8616_V8_User_Guide_1910010865.pdf Modem Manual]
 
* [http://www.dslreports.com/forum/r26026121-TekSavvy-Dry-Loop-DSL-TP-Link-TD-8616 PPPoe Configuration (third party)]
 
* [http://www.dslreports.com/forum/r26026121-TekSavvy-Dry-Loop-DSL-TP-Link-TD-8616 PPPoe Configuration (third party)]
* [http://www.tp-link.com/lb/download/TD-8616.html#Firmware 8816 Firmware]
+
* [https://www.tp-link.com/ca/download/TD-8616.html#Firmware 8816 Firmware]
* [http://www.tp-link.com/lb/download/TD-8616.html General TP-Link FAQ]
+
* [https://www.tp-link.com/ca/download/TD-8616.html General TP-Link FAQ]
 
   </div>
 
   </div>
 
  </div>
 
  </div>

Revision as of 17:03, 6 February 2019

TP-Link 8616
 TP-Link 8616 Front TP-Link 8616 Back

Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.

Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.