Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "SpeedTouch Configuration"

From Support
Jump to navigation Jump to search
(Created page with '=== Configuring the Modem/Router === # Plug in modem (including power and ethernet) then turn on modem # Open web browser and type http://speedtouch.lan in to the address bar. H…')
 
Line 1: Line 1:
This is the procedure NCF uses to configure the current version of SpeedTouch modems after a factory reset.  Older versions are similar.  To learn more about your modem, consult the [[manual]].
=== Configuring the Modem/Router ===
=== Configuring the Modem/Router ===
{{:Quick Facts (DSL modem)}}
# Plug in modem (including power and ethernet) then turn on modem
# Plug in modem (including power and ethernet) then turn on modem
# Open web browser and type http://speedtouch.lan in to the address bar.  Hit enter
# Open a web browser and type http://dsldevice.lan in to the address bar.  Press Enter
# Click Speedtouch from the menu on the left
# Click Speedtouch from the menu on the left
# Click '''Setup''' in the pick a task section at the bottom of the page.  This will cause a popup to come up on your screen saying '''welcome to speedtouch easy setup'''
# Click '''Setup''' in the pick a task section at the bottom of the page.  This will cause a popup to come up on your screen saying '''welcome to speedtouch easy setup'''
Line 12: Line 16:
# In the '''Internet Account Settings''' window, enter the DSL username as issued by NCF (e.g. aa000@ncf.ca)
# In the '''Internet Account Settings''' window, enter the DSL username as issued by NCF (e.g. aa000@ncf.ca)
# Enter the DSL password twice.  This password will start with the letters '''ncf''' and is not the normal password for your account
# Enter the DSL password twice.  This password will start with the letters '''ncf''' and is not the normal password for your account
# In the '''Access Controls''' window leave the username as '''Administrator''' and enter the DSL Password in the password fields twice
# In the '''Access Controls''' window leave the username as '''Administrator''' and enter the DSL Password in the two password fields
# Click '''Next'''
# Click '''Next'''
# You will now see a '''Confirmation Page'''.  Click '''Start'''
# You will now see a '''Confirmation Page'''.  Click '''Start'''
Line 19: Line 23:
# Click '''Finish'''
# Click '''Finish'''


=== To disable / enable wireless functions ===
=== To enable wireless functions ===
# Open web browser and type http://speedtouch.lan in to the address bar.  Hit enter
# Open web browser and type http://speedtouch.lan in to the address bar.  Hit enter
# Enter the ''username'' '''Administrator''' and the DSL password
# Enter the ''username'' '''Administrator''' and the DSL password
Line 26: Line 30:
# '''Wireless Access Point''' menu will appear.  At the top right, click '''Configure'''
# '''Wireless Access Point''' menu will appear.  At the top right, click '''Configure'''
# In the '''Configuration''' section, remove the checkmark beside '''Interface Enabled''' to disable wireless, or add the checkmark to enable it
# In the '''Configuration''' section, remove the checkmark beside '''Interface Enabled''' to disable wireless, or add the checkmark to enable it
# Click '''Apply'''
# If enabled, NCF recommends WAP-PSK with version WPA2.
# Click '''Apply'''.  Consult the modem manual for information about how to configure computers to communicate wirelessly to the modem.


=== Enabling the speedtouch firewall ===
=== To enable the SpeedTouch firewall ===
# Open web browser and type http://speedtouch.lan in to the address bar.  Hit enter.
# Open web browser and type http://speedtouch.lan in to the address bar.  Hit enter.
# Enter the ''username'' '''Administrator''' and the DSL password
# Enter the ''username'' '''Administrator''' and the DSL password
Line 37: Line 42:
# Click '''Apply'''.  This will redisplay your settings so that you can confirm.
# Click '''Apply'''.  This will redisplay your settings so that you can confirm.


 
=== Set the time server to National Research Council (NRC) ===
=== Setting up the NRC time server ===
# Click on '''Speedtouch''' on the left column
# Click on '''Speedtouch''' on the left column
# Click on '''Configuration'''
# Click on '''Configuration'''
Line 47: Line 51:
# In the box called '''Time Server 1''' enter '''time.nrc.ca'''
# In the box called '''Time Server 1''' enter '''time.nrc.ca'''
# Click '''Apply'''
# Click '''Apply'''
=== Disable 'web intercept' ===
(info here to be added)
=== Enable remote stats ===
(info here to be added)

Revision as of 15:33, 12 February 2010

This is the procedure NCF uses to configure the current version of SpeedTouch modems after a factory reset. Older versions are similar. To learn more about your modem, consult the manual.

Configuring the Modem/Router

DSL Quick Configuration Info
VPI / VCI (ADSL) 0.35
VLAN (VDSL) 35
Protocol PPPoE
DSL username (eg. aa999@ncf.ca)
DSL Password Starts with 'ncf' (not the same

as your NCF Start Page login)

  1. Plug in modem (including power and ethernet) then turn on modem
  2. Open a web browser and type http://dsldevice.lan in to the address bar. Press Enter
  3. Click Speedtouch from the menu on the left
  4. Click Setup in the pick a task section at the bottom of the page. This will cause a popup to come up on your screen saying welcome to speedtouch easy setup
  5. Click Next
  6. Select Router from the menu in the Service Selection window
  7. Click Next
  8. Use the drop down menu to select 0.35 in the VPI/VCI section of the Routed Internet Connections
  9. Confirm that PPPoE is selected
  10. Click Next
  11. In the Internet Account Settings window, enter the DSL username as issued by NCF (e.g. aa000@ncf.ca)
  12. Enter the DSL password twice. This password will start with the letters ncf and is not the normal password for your account
  13. In the Access Controls window leave the username as Administrator and enter the DSL Password in the two password fields
  14. Click Next
  15. You will now see a Confirmation Page. Click Start
  16. You will now have to wait as the SpeedTouch configures itself. You will see a window asking you to do so.
  17. Re-enter the DSL modem username Administrator and the DSL password to confirm
  18. Click Finish

To enable wireless functions

  1. Open web browser and type http://speedtouch.lan in to the address bar. Hit enter
  2. Enter the username Administrator and the DSL password
  3. Click on Home Network in the left column
  4. Click on Wlan: Speedtouch...
  5. Wireless Access Point menu will appear. At the top right, click Configure
  6. In the Configuration section, remove the checkmark beside Interface Enabled to disable wireless, or add the checkmark to enable it
  7. If enabled, NCF recommends WAP-PSK with version WPA2.
  8. Click Apply. Consult the modem manual for information about how to configure computers to communicate wirelessly to the modem.

To enable the SpeedTouch firewall

  1. Open web browser and type http://speedtouch.lan in to the address bar. Hit enter.
  2. Enter the username Administrator and the DSL password
  3. Click on Toolbox in the left column
  4. Click on Firewall
  5. Click on Configure in the top right
  6. Menu called security settings will appear. Click the button called Standard
  7. Click Apply. This will redisplay your settings so that you can confirm.

Set the time server to National Research Council (NRC)

  1. Click on Speedtouch on the left column
  2. Click on Configuration
  3. Click on Configure in the top right
  4. In the section called Time Configuration check the auto-configuration checkbox
  5. Change the time zone to -5 Eastern Time
  6. Check Summertime if it is currently Daylights Savings Time
  7. In the box called Time Server 1 enter time.nrc.ca
  8. Click Apply

Disable 'web intercept'

(info here to be added)

Enable remote stats

(info here to be added)