SmartRG SR516ac Firmware
Sold from June 2019
- We recommend that you only do firmware updates over an ethernet connection and NOT via wifi.
- DO NOT power off the modem in the middle of a firmware update, this is cause your modem become unresponsive (stuck in brick/recovery mode).
The current firmware available to the NCF Office is 18.104.22.168. You can verify your firmware by checking the software version on the Device Info page.
To request a copy of this firmware email firstname.lastname@example.org. To install this new firmware onto your modem perform the following steps:
- Download the firmware file and save it to a location on your computer that you can find easily.
- Open a web browser and go to the address http://192.168.1.1
- Select Manage Gateway (Advanced) and log in (by default the username is admin and password admin if on factory setting or your dsl password)
- Click on Management → Update Software
- Click on Browse
- Upload the firmware file that you downloaded in step 1.
- Click Update Software
Note: the modem will reboot once the new firmware has been uploaded. This process may take up to 15 minutes to resync (DSL light returns to solid green) and reconnect (the internet light starts blinking again).