Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Router Configuration"

From Support
Jump to: navigation, search
(Created page with 'Return to DSL Help Categories <big><b>Router Congiguration</b></big> When a separate router is used with your NCF modem, the typical setup is to put the modem in…')
 
Line 1: Line 1:
[[Categories|Return to DSL Help Categories]]
+
[[Special:Categories|Return to DSL Help Categories]]
  
 
<big><b>Router Congiguration</b></big>
 
<big><b>Router Congiguration</b></big>

Revision as of 15:34, 16 May 2012

Return to DSL Help Categories

Router Congiguration

When a separate router is used with your NCF modem, the typical setup is to put the modem into "Bridge" mode and have the router do the user authentication. The name of that authentication setting is called "PPPoE."

You should be able to configure your router by simply connecting the unit to your computer with an ethernet cable, and accessing the built-in configuration page. The address at which your browser should be pointed is often written on the bottom of the unit, or in the

Example Configuration Steps

DLink Router

Apple Airport Extreme