National Capital FreeNet / Libertel de la capitale nationale

Modem manuals (DSL)

(Bell Modems (not sold by NCF))
(Bell 2wire 2701HG-G, four ethernet ports, wireless "G", ADSL)
Line 216: Line 216:
[[File:2wireback.jpg|border|120px|left]]
[[File:2wireback.jpg|border|120px|left]]
<div style="overflow: hidden">
<div style="overflow: hidden">
-
* [http://www.ncf.ca/ncf/home/modems/manuals/ST516v6_InstallSetup_en.pdf Setup and User Guide]
+
* [http://www.2wire.com/pages/pdfs/2701_installation_guide.pdf Setup and User Guide]
-
* [http://www.ncf.ca/ncf/home/modems/manuals/ST516v6_InstallSetup_fr.pdf Guide d'installation et de l'utilisateur]
+
* [http://support.bell.ca/_web/internet/guides/2010_2701_UserGuide_2wire_EN.pdf Home-Networking Guide]
-
* [http://www.ncf.ca/ncf/dsl/modem/Datasheet_516v6.pdf Datasheet]
+
* [http://support.bell.ca/Internet/Products/2Wire-2701-modem.Tutorials Bell Tutorials]
-
* [http://www.level678.com/emulators/ST516v6/cgi/wizard/s1.htm ST516 Emulator]
+
 
-
* [http://www.level678.com/emulators/ST516v6/cgi/wizard/s1.htm ST516 Firmware]
+
</div>
</div>

Revision as of 18:18, 23 August 2016

The manual for your NCF-supplied DSL modem can be found at the links below.

For instructions on how to configure these modems, see Modem Configuration (DSL)

Contents

TP-Link Modems

9970, four-port ethernet + "N" wireless ADSL/VDSL



8816, single ethernet port ADSL


8961ND, four-port ethernet + "N" wireless ADSL


8951ND, four-port ethernet + "N" wireless ADSL


8950ND, four-port ethernet + "N" wireless ADSL


8901G, four-port ethernet + "G" wireless ADSL



8616, one-port modem only, NO PPPoe log-in capability

Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.

Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.



SmartRG Modem

SR505N, four-port ethernet + "N" wireless VDSL



Sagemcom Modem

2864, four-port ethernet + "N" wireless VDSL


Thomson Gateways

NCF sold Thomson modems prior to December 2011. Before 2010, Thomson Gateway (TG) DSL modems ('gateways') were called 'SpeedTouch' (ST).

TG585 DSL modem version 8, four-port ethernet + wireless ADSL



TG585 DSL modem version 7, four-port ethernet + wireless ADSL


ST585 DSL modem version 6, four-port ethernet + wireless ADSL



ST516 modem version 6, single ethernet port ADSL


Bell Modems (not sold by NCF)

Bell 2wire 2701HG-G, four ethernet ports, wireless "G", ADSL



See also