Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Modem Web Interface"

From Support
Jump to navigation Jump to search
(added image)
m (wikilinking)
Line 19: Line 19:
If the modem was pre-configured by NCF, the password is provided to you on a piece of paper with your modem package; it is ''not'' the same as your NCF StartPage password.  If your modem was not pre-configured by NCF, try entering the default password or blank.
If the modem was pre-configured by NCF, the password is provided to you on a piece of paper with your modem package; it is ''not'' the same as your NCF StartPage password.  If your modem was not pre-configured by NCF, try entering the default password or blank.


Once logged in, the modem will display the web interface page and allow you to configure it and make changes.
Once logged in, the modem will display the web interface page and allow you to [[Line stats (DSL)|read statistics]] or to [[Modem Configuration (DSL)|configure it]] and make changes.


[[Category: DSL]]
[[Category: DSL]]

Revision as of 11:07, 31 August 2012

Line stats displayed on a TP-Link 8901G modem web interface

DSL modems contain a computer comparable to a desktop or laptop computer running a Linux operating system. For the purposes of configuring it, there are several ways to communicate with that computer, but the easiest way is to use a web browser.

Open a web browser on any computer connected by ethernet or wireless to your DSL modem. Type in the address bar of your browser:

and press Enter. This is address of your DSL modem, and it will load its interface, which looks and acts like a web page.

If you are prompted for a Username and Password, enter:

  • Username:
    • "Administrator" (SpeedTouch 585 and 516v6)
    • "ncfdsl" (SpeedTouch 516v5)
    • "admin" (TP-Link)
  • Password: (enter here the password provided to you by NCF for your modem)

If the modem was pre-configured by NCF, the password is provided to you on a piece of paper with your modem package; it is not the same as your NCF StartPage password. If your modem was not pre-configured by NCF, try entering the default password or blank.

Once logged in, the modem will display the web interface page and allow you to read statistics or to configure it and make changes.