Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Modem Web Interface"

From Support
Jump to navigation Jump to search
(link for general info)
(simplify)
Line 3: Line 3:
Open a web browser on any computer connected by ethernet or wireless to your DSL modem.  Type in the address bar of your browser:
Open a web browser on any computer connected by ethernet or wireless to your DSL modem.  Type in the address bar of your browser:


*[http://dsldevice.lan http://dsldevice.lan] (SpeedTouch)
*[http://dsldevice.lan http://dsldevice.lan] or [http://192.168.1.254 http://192.168.1.254] (SpeedTouch)
*or [http://192.168.1.254 http://192.168.1.254] (SpeedTouch)
*[http://192.168.1.1 http://192.168.1.1] (TP-Link)
*or [http://192.168.1.1 http://192.168.1.1] (TP-Link)


and press Enter.  It seems like you are asking for a page from an internet website, but actually that is the address of your DSL modem, and it will present its interface, which looks like a web page.
and press Enter.  It seems like you are asking for a page from an internet website, but actually that is the address of your DSL modem, and it will present its interface, which looks like a web page.

Revision as of 13:15, 17 August 2012

DSL modems contain a computer comparable to a desktop or laptop computer running a Linux operating system. For the purposes of configuring it, there are several ways to communicate with that computer, but the easiest way is to use a web browser.

Open a web browser on any computer connected by ethernet or wireless to your DSL modem. Type in the address bar of your browser:

and press Enter. It seems like you are asking for a page from an internet website, but actually that is the address of your DSL modem, and it will present its interface, which looks like a web page.

If you are prompted for a Username and Password, enter:

  • Username:
    • "Administrator" (SpeedTouch 585 and 516v6)
    • "ncfdsl" (SpeedTouch 516v5)
    • "admin" (TP-Link)
  • Password: (enter here the password provided to you by NCF for your modem)

If the modem was pre-configured by NCF, the password is provided to you on a piece of paper with your modem package; it is not the same as your NCF StartPage password. If your modem was not pre-configured by NCF, try entering the default password or blank.

Once logged in, the modem will display the web interface page and allow you to configure it and make changes.