Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Modem Configuration (DSL) Unsupported Modems"

From Support
Jump to: navigation, search
(Zoom Modems)
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{:Quick Facts (all modems)}}
 
{{:Quick Facts (all modems)}}
This page contains notes to help in configuration of modems that have not bee obtained as new modems from NCF, but which may still be configurable without great difficulty.
+
This page contains notes to help in configuration of modems that have not been obtained as new modems from NCF, but which may still be configurable without great difficulty.
  
 
==Bell Modems==
 
==Bell Modems==
Line 6: Line 6:
 
Bell allows its DSL customers to either rent or buy their modems. Some of the modems become available as used modems.  The modems will work well on the Bell lines used by NCF DSL members.
 
Bell allows its DSL customers to either rent or buy their modems. Some of the modems become available as used modems.  The modems will work well on the Bell lines used by NCF DSL members.
  
;Bell Sagemcom FAST4350 / Home Hub 1000:
+
===Bell Sagemcom FAST4350 / Home Hub 1000===
  
 
The [[Modem manuals (DSL)#Bell Home Hub 1000, four ethernet ports, wireless "N" ADSL+VDSL|Sagemcom FAST4350]] is an ADSL/VDSL modem.  As of 2017-05-05, the modem supports all of the DSL speeds available from NCF (i.e. from 6-0.8 to 50-10).
 
The [[Modem manuals (DSL)#Bell Home Hub 1000, four ethernet ports, wireless "N" ADSL+VDSL|Sagemcom FAST4350]] is an ADSL/VDSL modem.  As of 2017-05-05, the modem supports all of the DSL speeds available from NCF (i.e. from 6-0.8 to 50-10).
Line 38: Line 38:
 
At this point, the modem will be ready for test on VDSL.
 
At this point, the modem will be ready for test on VDSL.
  
=== Zoom Modems ===
+
[[Category:DSL]]
 
 
;Zoom 5560A
 
 
 
<b>This section is in progress, not yet complete</b>
 
 
 
Insert a paper clip in the "reset" hole at the back of the modem.  When you contact a button inside, press gently until you feel a click. Hold the button for 15 seconds to reset the modem to factory configuration.
 
 
 
After a factory reset,
 
* Configuration server username is "admin"
 
* Configuration server password is "zoomadsl"
 
* Gateway and configuration server are at 10.0.0.2
 
* The modem will connect to ADSL
 
* The firewall is enabled
 
* Ports 21,23 and 80 are hidden (stealthed)
 
* Other ports 0 to 1055 are closed but not hidden [[https://grc.com/|https://grc.com]]
 
* DHCP and DNS are enabled
 
* The modem will not assign an IP address to any connected computer
 
* The modem is not configured to authenticate for an NCF Internet connection
 
 
 
Connect the modem to power and to the computer, then connect the ADSL line to the modem.  When the LAN and LINK LEDs lit, start a browser and go to 10.0.0.2 (the computer may not connect to the modem until you do this).  A "Basic Setup" page should appear in the browser.
 
 
 
Basic setup:
 
* <b>First</b>, set Virtual Circuit to 2
 
* Set Current Connection to "Enabled"
 
* Set Encapsulation to "PPPoE LLC"
 
* Set VPI to 0
 
* Set VCI to 35
 
^ Set Username to the DSL user ID
 
* Set Password to the DSL password
 
* Click on the Save Changes button, then click on Write Settings to Flash
 
 
 
 
 
When
 
 
 
[[file:5560A_UsersGuide_Eng.pdf|User Guide]]
 

Revision as of 00:25, 21 July 2017

DSL Quick Configuration Info
(all ADSL modems and all VDSL modems)

ADSL VPI / VCI:0.35
VDSL VLAN:35
Protocol:PPPoE
DSL username: Your NCF account ID @ ncf.ca
(eg., NCF user aa999 would have DSL username aa999@ncf.ca)
DSL password:Starts with 'ncf' (not the same as your NCF Start Page login)

This page contains notes to help in configuration of modems that have not been obtained as new modems from NCF, but which may still be configurable without great difficulty.

Bell Modems

Bell allows its DSL customers to either rent or buy their modems. Some of the modems become available as used modems. The modems will work well on the Bell lines used by NCF DSL members.

Bell Sagemcom FAST4350 / Home Hub 1000

The Sagemcom FAST4350 is an ADSL/VDSL modem. As of 2017-05-05, the modem supports all of the DSL speeds available from NCF (i.e. from 6-0.8 to 50-10).

It may be easier to configure the modem if it is started on ADSL first.

Connect the modem to ADSL and via Ehternet to the computer, and do a factory reset (hold the reset button down for 15 to 30 seconds). Wait for the WAN light

After a factory reset,

  • Configuration server username is "Administrator"
  • Configuration server password is "admin"
  • Gateway and configuration server are 192.168.2.1
  • The firewall is enabled and properly configured
  • The modem will connect to ADSL or VDSL
  • The modem is not configured to authenticate for an NCF Internet connection
  • Wi-Fi is enabled with a default configuration that must be changed
  • WPS is enabled

Immediately after any successful login, the modem configuration server will ask if you want to use password recovery. Choose "No" because the Bell password recovery would only work for a Bell DSL customer.

If you see a "Home" button on the right near the top of the page, click on the button, because configuration must begin at the home page. At the top of the home page, right side, there will be "Basic view" and "Advanced view". Choose the "Advanced view".

Go to the bottom of the page and click on the "Modem Settings" button. At the top of the next page, near the left side, will be a "Fibe Internet" icon with a round icon below. The icon is red if there is no authenticated internet connection and green if there is an authenticated connection via DSL. Click on the icon to check the login ID or to change the login ID and the login password.

After getting a successful internet authentication, go back to the home page and click on the "WiFi settings" button above the "Modem settings" button. On the lower left of the next page will be a menu. Click on "Primary" to set the WiFi SSID and the WiFi password. Click on "WPS" to disable WPS,

At this point, the modem will be ready for test on ADSL.

After testing on ADSL, disconnect and unplug the modem, and then reconnect it with VDSL. The modem will probably assign a different IP address to the computer so, at the computer, you should disconnect and then reconnect the modem interface. You may also have to re-enter the DSL login password, but the DSL login ID will already be present.

At this point, the modem will be ready for test on VDSL.